Some clips are pretty basic. Others, like the Fabriclip, need a bit of time to figure out. But once you walk through these steps and get it, it's so easy!
A BIT ABOUT THE FABRICLIP
Works with no belt at all, or with any size belt threaded over it for extra support
It locks directly onto clothing and other soft materials
Unlocks easily without breaking or damaging clothing
Adjustable ride height
No, the clip on your holster is not installed upside down! :) - watch the video below!
Don't be afraid of pushing or pulling hard on the clip - it's very pliable and it won't break!
Push the TOP part of the big square frame out and away from the holster, while simultaneously pulling out on the bottom part. This will release the bottom and allow you to pop it over the center section that has the screws.
Pull the square frame part of the clip away from holster and slide the holster onto your waistband.
Now push the top part of the clip out and away from the holster again, which will allow the bottom part of the square frame to move back under the center piece with the screws, locking the holster onto the waistband.
Working with the BOTTOM screw only, loosen it for thicker clothing & tighten it for thinner clothing.
The bottom of the square frame should lock tight around the clothing AND the straight center piece. If it's not locking tight or staying on, then it's not on properly. Adjust the screw to suit the clothing if you are wearing something very thin or very thick and make sure the center piece protrudes completely over the bottom edge of the square frame.
We are working on making some videos of our own for you, but in the meantime, this is a good one to watch. PLEASE NOTE: This video shows the first version of the Fabriclip, which is 2 separate pieces (the square outer frame and the straight center piece). The latest Fabriclip version still has those same pieces, but they are connected, ie. it is just one piece, but it functions the same way. Just be aware the Fabriclip on your holster is slightly different to the one in this video.