These grips feature full-color, full-coverage images! Select a stock graphic, or submit your own for a custom set of grips! The grips are available for: 1911's, Sig P938 and Ruger Revolvers.
The grips are molded using a high strength, engineered polymer that provides toughness and durability. They are decorated with a patented printing method that infuses the inks into the polymer grip material and provides one of the most permanent image results available today. Unlike other decorated grips, the images on these grips are resistant to salt, oil, solvent, water, impact and abrasion. The images aren't on the grips, they're in the grips.
Compatible with ambidextrous safety. All sizes except compact have a smooth texture. Compact size has slightly textured surface.
Will fit: All standard, mil-spec full-size 1911's and clones - Compact 1911 - Bobtail 1911 - Ruger 22/45 or MKIII - Taurus PT1911
Screws: Your stock screws will fit these grips except for Taurus PT1911 older models with "fatter" screw heads that will not countersink into these grips. For these models, to have flush, countersunk screws you will need to purchase standard 1911 grip screws, which can be found online at stores like Brownells or Midway USA or at your local gun shop. Newer PT1911 model screws will fit the grips.
What size grips do you need? If your grip height is 5.25" (height 90 degrees to barrel center), you have a full-size grip frame. Less than that is a compact. Full-size 1911 will have a screw hole spacing (center-to-center) of approximately 3 1/16”. The same spacing on the compact model 1911 will be about 2 11/16”.
The 1911 grips will NOT fit these models as they are not standard: Springfield EMP, Star BM 9mm, Browning 1911-.380
Compatible with ambidextrous safety. Grips have a slightly textured surface
Compatible with all full-size models in these series.
Select "Ruger" to fit: The XR3-Red made from 1962 - 2004, the largest of Ruger's standard gripframes: Ruger Blackhawk, Super Blackhawk 4.5 - 6.5" barrel lengths with round back trigger guard, Single Six, Old Army, and Old Vaquero models. (Will NOT fit: Old Model XR-3 used on original 3-screw guns manufactured 1953 - 1962; Bisley and Birdshead gripframes; .22 Bearcat gripframe; or the Super Blackhawk 7.5" - 10" barrel length with the square back trigger guard)
Select "Ruger XR3" to fit: New Model Vaquero, 50th anniversary Blackhawk, Super Blackhawk with square trigger guard with barrel shorter than 7.5", Ruger Flat-Top Blackhawk, pre-1963 Single Six (Will NOT fit Dragoon models)
If you're unsure which Vaquero model you have, the Old Model has a serial number with a 2-digit prefix, and the New Model has a serial number with a 3-digit prefix (for example, 512-48556).
These stock graphics do not work on the revolver grips due to shape/placement issues, please don't select them: Digital Camo, Flaming Aces, Grim, Lavender Dagger, Pink Venom, POW-MIA, Scorpion, Silver & Gold Dragon, Veritas Aequitas, Zombie, Zombie on Biohazard
Click on any photo thumbnail to scroll through all available stock designs.
Semi-Custom: If you would like initials or a name to be added to an existing design, select the semi-custom option ($84.95)
Fully Custom: We don't create artwork from scratch, but we will work with the image/s or artwork that you want to use. Custom grips are $112.95 for the first set. Subsequent identical sets are $64.95 (we save the template).
Steps for custom orders:
1. Send your high resolution images for us to review.
2. Once we determine that your image/s will work, you can place your order.
3. An electronic proof will be emailed to you within a couple of days. At this time, you can make changes, cancel your order, or approve the proof for production.
4. If approved, it takes about 10 days to make the grips.
Pease contact us first, let's discuss your ideas before you order. For more details on exactly what's involved in the custom design process, please check the "custom grips" tab on this page.
There's a lot we can do! But we do not create artwork from scratch. We can only work with your finished artwork or supplied images.
Finding a workable image:
If your image has a special background color or design that you want to keep, it helps us to have as much background as possible, so that we can extend it all the way to the edge of the grips. If your image is cropped too close, this could present an issue. The more background we have, the better. It's not as critical with solid black or white backgrounds, but it is with other colors or patterns.
Decide on a background (if there isn't one in your image):
Send us your images by email - once we determine what your images, text and background will be, you can proceed with placing your order. Due to the time required to create them, we do not provide mock-ups/proofs until after your order is received.
Posted by Chris Duncan on 17th Nov 2016
I ordered grips with graphics for my New Vaquero. They fit perfectly and look great too.
Posted by Kevin Bailly on 5th Nov 2016
I specially ordered my grips for my military branch of service and battalion. After posting the final product fitted to my firearm. I received great reviews from my fellow brother's in arms. I have had many asked where I got the work done and they are going to be ordering the same issue. Great fit and high quality work.
Posted by Pat Mc on 13th Aug 2016
Kelly in customer service was great. The custom photo on the grip turned out great.
Posted by steve tretakis on 5th Jul 2016
I wish i could just post a picture, it would say it all. Easily walked through the custom grip process and the results were outstanding
Posted by 8a on 9th Apr 2016
Love my new grips with a custom photo...customer service is awsome very helpful with my purchase they made sure I got the best design that works...can't wait to order another set. Thanks
Posted by Lisa Napolitano on 9th Dec 2015
Thank you for my perfect Grips! You team was very patient, continued to work with me until I stopped changing my mind and design (a lot) - I never felt pressured to "Hurry" or "Settle" in my decision. Looking forward to future purchases and recommend them to everyone who compliments my new grips!
Posted by Jewel Rae on 8th Oct 2015
Love the way the roses contrast with my gun. Feels great in my hands!
Posted by Keith Hupka on 14th Aug 2015
Due to the nature of what I sent to Gun Goddess, numerous iterations were required to get the image that I wanted. I was expecting a steep service fee, and was pleasantly surprised when the final total was the same amount quoted to me at the start of this endeavor. Furthermore, I had additional questions about the product after I received the grips and was met with the same outstanding customer service that I had encountered prior to buying the grips. The grips fit perfectly, look great, and have enough grit to them to make them more than just decorative. Very happy that I found this company and ordered from them.
Posted by Michael Patton on 26th Mar 2015
I just finished trying to return a product from ebay. Not a good experience. Not putting them down! I have had excellent experiences with Gun Goddess. I particularly appreciate the personal help I receive and the products so far are outstanding. I plan on buying several more sets of grips in the near future. Strongly recommend Gun Goddess and Athena.
Posted by Joel on 23rd Feb 2015
I defenitly would recommend these grips to anyone. They look and feel great! 5 Stars⭐️⭐️⭐️⭐️⭐️
Posted by Dani on 23rd Feb 2015
We ordered custom grips for my husbands bobtail 1911 and love them! They worked with me on finding the right picture and sent me a prototype of what it was gonna look like. and it looks great and fits perfectly!! I'd def recommend Gun Goddess to do custom grips!
Posted by Troy wright on 4th Jan 2015
I ordered two sets of custom grips and they have met all expectations. The compact set fit perfectly and the full size set will need some shaving to fit but that was expected. I have a few friends that will be putting an order in after seeing my grips. Communication during the whole process was excellent and everything was as promised. I couldn't be happier with my purchase.
Posted by Craig Partridge on 22nd Dec 2014
I ordered some custom grips for my father, who is retired military. It was my first time ordering something in this way. The communication was great from the first email which made the process easy and enjoyable! They were patient with me while I went back and forth between them and my father. The product was great and my father loved it! Craig Partridge
Posted by Emily on 11th Dec 2014
I love the way my custom grips turned out! And I also loved the quick response to my emails about my order , will deffinatly order from gun goddess again
Posted by steve on 1st Dec 2014
Recently ordered some custom graphic designs for a full size 1911 grips. It all went almost too well and came out perfect. Fast service, quality product and great communication with Athena. That my friends is how you treat customers and get return orders. Thanks a lot Athena and continued success.
Posted by Quan on 17th Nov 2014
Got an Armscor 1911 on the cheap and decided to use the savings on some custom grips. Had a design floating in my mind, so I reached out to a couple of companies via email. Ended up deciding on GunGoddess due to the quick response times from Athena every step of the way. Final product fits pretty well and looked great. If open carry passes where I am, I would definitely be inclined to do so (with a good retention holster and while maintaining situational awareness, of course) because pretty artworks deserve to be shown to people.
Turnaround time was good, had prompt responses from Athena during the design process. Once I had finalized the design on my end, it was 5 business days (factor in that I also requested they try to fiddle around with the image and touch it up some) to get a mock-up. Once I gave the go-ahead on the mock-up, it took about 3 days for the grips to be produced and shipped to me. Ahead of schedule, in fact, so that's always a plus. In addition, I can confirm after cleanings that they are, in fact, resistant to solvent.
Posted by Michael Patton on 15th Oct 2014
I recently discovered this website and the American Spirit 45 ACP grips are the most incredible I've seen. I wanted to add an additional tribute to 9/11. They did so for a very reasonable fee and I am very pleased. I emailed them several times with questions and they always responded timely. Athena even emailed me after hours. The end product was perfect. I highly recommend Gun Goddess for your needs.
Posted by Jim Wegman on 13th Oct 2014
I had a custom design put on 1911 grips. It was done quickly, shipped promptly, and the work on the design was perfect. I could not be happier.
Posted by Dave on 22nd Aug 2013
A few months back I contacted Athena about some tribute grips (to my father who passed away this year),Let me say that Athena was very understanding and took my story to heart.She made every attempt to make sure this would be special set to commemorate my dad,she went out her way on several occasions through this process to make sure that the final product would turn out and if i did not like them she would cancel it outright.This was very arduous in that it took several emails back and forth to get it right.She finally got her team on track with what i was looking for and the end result was outstanding!!!My only complaint is not with the work or process but the grip manufacturer,They state that these are ambi safety grips of which they weren't.I had to dremel a fade away cut in order for the safety to clear the grip.But overall very impressed
Posted by Luke Niedner on 12th Aug 2013
Product was flawless and the image came out better than expected. I will refer everyone to these grips and look to purchase more in the future. Thank you.
Posted by Unknown on 27th Jun 2013
1st my line of work is on time fast and right the first time. These grips were all of this, not a lay on vinyl coat but through an through front and back.
2nd I had a shipping error, contacted Gungoddess an the issue was fixed ASAP!!! That's how one does business thank you again.
3rd fast shipping, great product, professional group to deal with. Repeat business is for certain, referrals for others to do business also a certain.
Love the grips!! Just in time for the next mission. Thank you again!!
Posted by Mike Sch. on 28th May 2013
My grips arrived 9 days after ordering - in Germany!!!!! That's awsome!!!!!!! I ordered the "Green Reaper" for my customed Copper-plated 1911 and they look absolutely great! And I am just at doing a custom design for my other 1911.
Posted by Unknown on 4th May 2013
Athena, thanks for all your help. my grips look as good as i had hoped, with your direction and a custom design. they feel great; much more substantial than the stock grips. my grips arrived much sooner than i expected. Athena made the entire process a breeze.. Thank you!!
Posted by Unknown on 19th Dec 2012
i got a set of the grips for my kimbers good looking grips made to the order very good work
Posted by Karen on 20th Sep 2012
I ordered the punisher grips for my Sig 1911, plus 3 other grips for my family members. The turn around time was approximately 2 weeks. The grips fit my 1911 with no problem. I have no problems with the way the grips feel when shooting.
Posted by Dean Barr on 7th Sep 2012
I asked for a custom set of grips.... urban digital with my college logo (VMI) included. Athena was quick to respond and was able to get the crew to do a set up for me. Service was excellent, great communication and rapid fabrication. I got my grips in about a week.
No fit issues at all and the grips look great on my 1911's!
Posted by Brad on 14th Aug 2012
I wanted a pair of grips for my 1911A1 that had my college logo on it.
I was unable to find anything good on the internet, so I contacted the Gun Goddess and told her what I wanted. It took a week or so to get the correct graphic, but the results were fantastic. The grips were produced and shipped in a week. They fit perfectly out of the box. They are made of a hard material which holds up far better than wood. This is a top shelf product for the money.