Patterned Thread Protectors
$29.99
Product Details
These awesome thread protectors offer a custom look. Screw them on to protect the threads when an accessory is not being used.
They're constructed from 7075 aluminum. This is the same high quality aluminum used for the upper and lower receivers of high-end billet AR's (less expensive AR's use 6061 aluminum). Each individual thread protector is machined using the latest CNC machines and techniques.
Made in the USA!
Dimensions:
-
All pistol thread protectors: 0.4" Long & 0.6" Outside Diameter
-
All rifle thread protectors: 0.7" Long & 0.75" Outside Diameter
Thread Pitch:
All designs & all colors are currently available in the most common size, 1/2 x 28 for 9mm/22lr barrels (generally aftermarket barrels).
The following thread pitches are also available, in limited designs and limited color options:
-
M13.5 x 1 LH (9mm & 22lr Euro/Metric - for Glock/Sig/HK with factory threaded barrel)
-
.578 x 28 (45ACP US)
-
M16 x 1 LH (45ACP Euro/Metric - for Glock/Sig/HK with factory threaded barrels)
-
1/2 x 28 (.223 & 5.56 rifles - AR15's and some AR9's - ** Please see important note below about AR9's)
-
5/8 x 24 (For .30 Cal Rifles - 308 AR10 - 300BLK AR - 300 WIN MAG, etc.)
PLEASE NOTE:
Aftermarket Barrels: Most threaded pistol barrels are aftermarket. These are made in the US and use the US threading (1/2" x 28 for 9mm or .578" x 28 for .45).
Factory threaded barrels: New factory Glocks (also Sig and HK) that come stock with threaded barrels are made in Europe and use the Metric threading (13.5 x 1LH for 9mm and M16 x 1LH for .45).
9mm AR's: Most 9mm AR's are threaded 1/2" x 36. We do not offer protectors in this thread pitch at all. However, a small percentage of 9mm AR's are threaded 1/2" x 28. If, in fact, you have a 9mm AR that is threaded 1/2" x 28, the pistol 1/2" x 28 thread protectors will NOT work! They will be too short and the diameter will not match the diameter of the AR barrel. So do not order the option marked as "1/2" x 28 US 9mm & 22 LR. Please order a Rifle Thread Protector, listed as "1/2" x 28 Rifles .223/5.56", which will be longer and have the same diameter as the AR barrel!
Don't shoot with these on: When you are shooting, screw on an accessory or leave the threads bare. These protectors are designed to be screwed on when an accessory is not being used, to protect the threads. It is NOT recommended that you shoot the pistol with the thread protector installed. If you do, you should tighten it after each mag fired just like any other muzzle device that is not permanently attached or clamped down with set-screws.
Included O-Ring: Every order will ship with a loose, optional O-Ring. These thread protectors have finer threads, because if they are too thick/coarse, they won't fit on all barrels. This is pretty standard, as most accessories have finer threads and most barrels have coarser threads. But if your barrel has fine threads, or if you feel you want a tighter fit for the thread protector, just use the O-Ring.
AVAILABLE DESIGNS - Hover/touch to view design name. Click/tap to enlarge.
Note: USA Flag, Kryptek and Muddy Girl are the only designs that have a synthetic colored band wrapped around the aluminum protector. These are designed to be primarily "for show" as the designs will wear over time. All other designs are 100% 7075 aluminum.
Customer Pics & Reviews
ProductQualitySkullCustomer servicePriceBarrel protectorFitHelpSelectionThreads
D
Fits perfect, looks great!
D
It was nice to have received my order quick! I love the quality of it and how good it looks on my CANIK TP9SFX.
P
1/2”x28 fit my stock threaded barrel. It’s a solid thread protector. Quality work.
L
Great product! Looks amazing! Will definitely buy again!
w
The only thread protector I could find that stayed on while firing and didn't come loose
D
So I feel in love with the American flag pattern thread protector. I quickly ordered one for my Glock 19 P80 build, then say by the door like a kid on Christmas for the mail man to bring it. When it arrived I quickly tore open the package, and there it was in all of its Merica beauty. Went to throw it on the gun but alas there was an issue, the thread protector was missing one vital detail, it wasn't threaded. I went to the computer to ensure my order was correct, and it was. So I emailed the gun goddess and waited for a reply. To my surprise I received a call soon after sending the email, which I expected to hear from them a day or so later, so this was nice to see they care. The woman I spoke to asked me to send a couple pics to her of the non threaded thread protector. She then assured me that they would take care of this the next day as it was outside business hours, which is why I didn't expect the call. So the next day I get an email saying that they spoke to the manufacturer about the issue and they were getting a replacement sent out. So I waited for the new one, which came pretty quick. Opened the new package to find a note that the owner of the manufacturer sent me. Not only did he make things right with my initial order, he threw in an additional thread protector for the inconveniences it was a small gesture but was nice to see they take their customer service, and customers needs and place it high on their list. I love both (well 3 if you count the first one) of my thread protectors and will definitely order from the gun goddess again. The friendliness and customer service alone has gotten them a customer for life, and I will refer anyone I know to them 1000%. Thank you again for the help and quality products.
J
I love this threaded barrel protector I bought the one with a skull on it. It fits perfect on my Gen 4 Glock 19. I will definitely order from the site again. only took 8 days to come in.
J
Looks awesome smooth and fits perfect.
M
BA thread protector. Threads are smooth and line up perfectly. Laser engraving is sharp and deep. Good enough to provide a grip surface to tighten upon full threading. Looks great. Highly recommended.
S
Looks cool well made great price
S
I purchased the black honeycomb thread protector to finish the look on my Zev OZ9 compact... I wanted a threaded barrel for my suppressor, but wanted the thread protector to match the aesthetic of the backplate and mag release. Fortunately, this thread protector looks great!
R
Great selection and they ship super fast.
Highly recommend
M
You won’t be disappointed.
J
Great product. Shipped quickly.
S
100% satisfied. Arrived fast. Holds tighter to my p320 threaded barrel than the stock sick thread protector does.
M
Sometimes you worry about online orders... If the threading will match, or if the quality is so so. Not here. Got the Punisher skull, fits perfect, quality is nicer than what came stock with my L2D barrel! Was here in just a few days. Will order again. Price was pretty fair, if you order your barrel without a TP, it's about a 5$ dif.
A
I ended up purchasing a black frag pattern thread protector for my factory threaded glock after an order through amazon fell through. While this thread protector is quite a bit more expensive than the one I originally had my eyes on, the machining and finish is well worth it. It looks better in person than the pictures on this website appear and the shipping was quite prompt. Will definitely be ordering more items from this store although I do recomend rebranding the website as "gun goddess" was an initial deterrent for me as a 26 year old man.
C
Good afternoon, will these thread protectors fit the barrel end for the Beretta 20x Bobcat?
Yes, you will need a size 1/2"×28 thread pitch
C
Looking for a 13.5 x 1 LH thread protector in red to go with my canik combat elite. Any chance of getting one? Diamond, honeycomb, I don't really care.
Unfortunately, red is not available.
J
Thread protector .578x28 ?
Yes, we do carry 0.578 x 28 (US .45ACP) - it is in the thread pitch dropdown menu.
M
Is there gonna be a Gold Honeycomb for the 13.5x1 thread?
Unfortunately, Gold Honeycomb is not available for this thread pitch
C
Does it fit a Glock 19
As long as your barrel has a thread pitch that we offer, it will fit. 9mm gun models are available in thread pitch 1/2x28 US and M13.5x1LH Euro/Metric.
R
Do you have a thread protector that fits the sig sauer MPX K model, that is a 4.5 inch long 9mm barrel that is 1/2X 28 LH (reverse threaded) barrel?
Unfortunately, we do not offer any reverse threaded thread protectors so we do apologize that we could not be of help to you with this.
A
In the 5/8x24, are the options limited to the diamond, frag, honeycomb and molon labe? Is it possible that other designs could become available?
Yes, this size is limited to just the 4 options listed. No, it will not be available in the other designs.