GunGoddess XSkel Scope Mount

TEMPORARY DELAY: THIS ITEM WILL SHIP ON SEPTEMBER 9

The Warne X-Skel Scope Mount gets an exclusive splash of GunGoddess color! This brand new mount style offers an additional 1” of forward cantilever over Warne's renowned Skel mount, and the 1-piece clamp is designed for added strength. 

The rugged, lightweight design of the X-Skel maintains Warne's famous Return to Zero capability - remove your scope, in its mount, from your rifle and then re-attach it in the same position. Your zero is maintained!

The X-Skel features a  skeletonized ring body and caps for reduced weight and steel threaded cap inserts for maximum durability. It places your optic at the ideal height with a generous cantilever for proper eye relief and will easily accommodate the longer eyepieces found on many of today’s scopes.

Features:

• Lightweight, skeletonized aluminum body and caps to reduce overall weight without sacrificing reliability.
• CNC precision machined from 6061 aluminum
• #8 Torx style fasteners with steel threaded inserts to prevent stripping.
• Additional 1 Inch cantilever forward design to provide additional eye relief.
• Places your optic at the ideal height for modern sporting rifles and similar platforms.
• 1/2” tactical nut attachment -  65 in/lb. of torque is recommended.
• Available in 30mm
• Colors: Teal & Black. Purple is discontinued and will not be restocked
• Ships FREE - Made in the USA

Specs:

Instructions:

Loosen both nuts on the X-SKEL Mount and install on your Picatinny style rail with the cantilever forward (Warne recommends mounting the X-SKEL with the front cross bolt in the farthest forward slot on AR15 Flat Tops.) Push the X-SKEL Mount towards the muzzle and tighten both hex nuts to 65 in/lb. Remove the four cap screws from each top cap with the supplied T-15 wrench and remove the top caps. Place your scope in the X-SKEL Mount and replace the top caps and screws. Slowly tighten cap screws evenly and leave loose enough to adjust for eye relief. Level the reticle and tighten the cap screws in a crisscross pattern to 25 in/lb.

Get Color Matching Side Mount Adapter:

45 degree side mount adapter sold separately.

International sales: Scope mounts are NOT ITAR restricted.  This item CAN be shipped to addresses outside the United States.